BJM Electric Submersible Shredder Pump SK37C-230T

BJM
Electric Submersible Shredder Pump
* Overnight Shipping Available! Part #:SK37C-230T

The Shredder (SK) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.

304SS Motor Housing Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.

Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.

More Motor Protection Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.

Tough Pump Construction Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

Key Features

• Horsepower - 5
• Volts - 230
• Rated Amps - 14
• Max GPM - 330
• Phase - 3

BJM shredder pumps are heavy-duty pumps that will shred material as it enters the pump, ensuring that it does not let any large solids pass through that could potentially clog the pump. Pump Express provides a variety of BJM shredder pumps that can be utilized in industrial settings as well as municipal environments.

Additional Information (PDF):

Electric Submersible Shredder Pump Specification
Electric Submersible Shredder Pump Performance curves
Electric Submersible Shredder Pump Product Brochure